• Home
• News
• Visit Us
• Calendars
• Catalog
• Apply
• About Us
• Contact Us

Tool List

Required Tools

• 1 8-drawer Rolling Tool Chest (maximum width: 48")
• 1 Pliers
• 1 Side cutter
• 1 Adjustable pliers
• 1 Needle nose pliers
• 1 Folding hex wrenches SAE
• 1 Folding hex wrenches - metric
• 3/8" drive 6 point socket set that includes the following sockets:

3/8", 3/4", 11/16", 1/2", 7/16", 3/8" drive ratchet, 5/8", 9/16"
• 3/8" drive metric 6 point sockets set that includes the following sockets:

8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 21mm,
• 1 3/8" drive extension 3"
• 1 3/8" drive extension 6"
• 1 12 foot tape measure
• 1 Z87.1 safety glasses (non-tinted, non-mirrored lenses)
• 1 Hammer (dead blow, steel soft face)
• 1 Scraper (1 ¼ wide Blade)
• 1 Flexible curved tooth file
• 1 TORX® Socket Driver Set (T8 to T60)
• 1 Stubby awl
• 1 Door handle tool
• 1 Trim pad remover
• 1 Orbital air sander (Vacuum)
• 1 Sanding block, 5" X 2 3/4"
• 1 Sanding block, 9" X 2 3/4"
• 1 Sanding block, double side
• 1 Body Hammer (cross peen, pick)
• 1 Body Hammer (pick and ding)
• 1 Toe Dolly
• 1 Heel Dolly
• Combination Wrenches:

7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 21mm
• 1 Punch set
• 1 Standard screwdriver set (8pcs.)
• Phillips #1 6” long
• Flat Tip .037 wide 3” long
• Flat Tip .032 wide 6” long
• Phillips #2 8” long
• Flat Tip .037 wide 8” long
• Flat Tip .046 wide 10” long
• Phillips #2 3” long
• Flat Tip .050 wide 13” long
• 1 1/4" drive ratchet
• 1/4" drive standard 6 point sockets:

3/16", 1/4", 3/8", 7/32", 9/32", 11/32", 7/16", 5mm, 6mm, 8mm, 10mm, 12mm, 5.5mm, 7mm, 9mm, 11mm
• 1 1/4" drive extension 4"
• 1 1/4" drive extension 6"
• 1 General Purpose Dolly
• 1 Light Dinging Spoon
• 1 File Holder
• 1 Blow Gun
• 1 Locking pliers, straight
• 1 Locking pliers, needle nose
• 1 5/16" spot weld drill bit
• 1 Earmuffs
• 1 Set of pry bars
• 1 Set of Vice Grip pliers
• 1 Air fitting adaptor (for use in collision and refinish labs)
• Pick set
• 1 DVOM (Digital Volt Ohm Meter)

Second Year Tool List (needed for 3rd and 4th semester labs)

• 1 Mini Air Die Grinder, Right Angle
• 1 Cut-Off Tool, Air, 3" (22,000 RPM)
• 1 3/8 Air Ratchet (5-45 ft. lb.)
• 1 1/4 Air Ratchet (1-20 ft. lb.)

Tool Kit may be purchased at the Penn College Store.