Automotive Service Sales & Marketing
School of Transportation Technology
Parkes Automotive Technology Center, Room 133 · (570) 327-4516
Collision Repair Tool List
Required Tools
- 1 Padlock, key or combination
- 1 Safety glasses
- 1 Welding goggles
- 1 Canvas gloves
- 1 Pair of tin snips
- 1 Steel measuring tape (SAE/Metric)
- 1 Rollaway tool cabinet
- 1 Pick hammer
- 1 Universal dolly
- 1 Heel dolly
- 1 5 lb. hammer
- 1 Set of combination wrenches (SAE and metric)
- 1 Needle nose pliers
- 1 Slip Joint pliers
- 1 Set of standard screw drivers
- 1 Set of Philip screw drivers
- 1 Set of 3/8" deep socket SAE, include ratchet & extensions
- 1 Set of 3/8" metric sockets
- 1 Pocket knife
- 1 Scratch awl
- 1 Diagonal pliers
- 1 Set of 1/4" deep sockets including ratchet & extension (SAE & Metric)
- 1 Channel lock pliers
- 1 Vice grip C clamp
- 1 Punch & chisel set
- 1 Charcoal paint respirator
- 1 Plastic or paper mixing board (approx. 12"X12")
- 1 Flat body file holder
- 1 Half round file & holder
- 1 Long sanding board
- 2 Half round Stanley blade
- 1 Air blower
- 1 Putty knife
- 1 Set of plastic applicators
- 1 Set of 1/2" driver sockets including ratchet & extension SAE & Metric
- 1 Sanding block
- 1 Rubber hammer
- 1 Body spoon
- 1 Set of "3/8" drive torx set
- 1 Soft sanding pad
- 1 Full face shield
- 1 Metallic paint stir stick
- 1 Ear protectors
- 1 Flashlight
- 1 Air chuck
- 1 Tire gauge
- 1 Medium ball-peen hammer
- 1 Large selection of vise grips
Optional Tools
- Small pistol grip grinder
- Air drill or rechargeable drill (3/8")
- Cutoff wheel grinder
- 3/8" air ratchet
- 1/2" impact wrench
- D.A. sander
- Panel cutter and bits
- Digital/Volt/Ohm meter DVOM
Items on the optional tool list will be able to be purchased through the Penn College Store at student discount rates, but students are not required to have them for their coursework at Penn College.