• Home
• News
• Visit Us
• Calendars
• Catalog
• Apply
• About Us
• Contact Us

Required Tools:

• #2 Phillips Screwdriver 7"
• #2 Philllips Screwdriver 9"
• 1/2" Drive 1 1/4" 6 pt Shallow Socket
• 1/2" Drive 1 3/16" 6 pt Shallow Socket
• 1/2" Drive 15" Breaker Bar
• 1/2" Drive 3" Extension
• 1/2" Drive 5" Extension
• 1/2" Drive 8" Extension
• 1/2" Ratchet
• 1/4" Drive Socket Set
• 1/4" Flat Tip Screwdriver
• 10 Pc Punch and Chisel Set
• 10" Gator Pliers
• 11 pc 3/8" 12 pt. Shallow Socket Set
• 12 Ft Tape
• 13 pc 1/2" Drive 6 pt Shallow Standard Socket Set
• 16 oz Ball Peen Hammer
• 3/8" Drive 12 pc Shallow Metric Socket Set
• 3/8" Drive 3" Extension
• 3/8" Drive 6" Extension
• 3/8" Ratchet
• 4 oz Ball Peen Hammer
• 5/16" Flat Tip Screwdriver
• 5 Drawer Chest Toolbox (toolbox dimensions can not exceed 28"W x 21"H x 18" D. May have roller cabinets but must be sized proportionately)
• 6" Pocket Ruler
• Circuit Tester 6 and 12 Volt
• Circuit Tester 18 and 24 Volt
• Diagonal Cutting Pliers
• Feeler Gauge
• Flashlight with Magnet
• Hacksaw
• Hex Wrench Set
• Long Sleeve Coveralls & Boots (student is required to wear leather work shoes or boots and coveralls in all labs)
• Fluke 87 or higher
• Pinch Bar
• Pliers
• Pliers, VISE-GRIP®
• Safety Glasses
• Scraper
• Wrench Set 14 pcs 12 pt 3/8" to 1 1/4"
• Wrench Set 10 pcs. 12 pt 10-19mm

 

Contact the Penn College Store to receive pricing estimate and ordering information. The College does not endorse Snap On Tools; the numbers are listed only as a reference.

This page was last updated (Friday, January 30, 2009)