Building Construction
School of Construction & Design Technologies
Lifelong Education Center, Rm. C156 · (570) 327-4518
CB Tool List
Carpentry Tools
- 1 each Nail apron (**)
- 1 each Safety glasses (**)
- 1 pair Hearing protection (**)
- 1 each Work Shoes (hard sole) (**)
- 1 each Hard hat (only for outside jobs) (**) (any color except white)
- 1 each Toolbox 30”
- 1 each 25’ Tape Measure
- 2 each 6” c-clamps or quick grip clamps
- 1 each 6 in 1 convertible screwdriver
- 1 each Vice grip
- 1 each 10” adjustable wrench
- 1 each Hammer – 16 oz. or 24 oz. straight claw hammer (**)
- 1 each Speed Square (BCT 103, BCT 109)
- 1 each Combination square (BCT 103, BCT 257)
- 1 each Block plane 7” (BCT 103, BCT 257)
- 1 each Sliding T bevel (BCT 103, BCT 257, BCT 127)
- 1 each Spade type wood bit set (3/8” to 1”) (BCT 257)
- 1 each Countersink (BCT 103)
- 1 each 2 – 1/8” hole saw (BCT 257)
- 1 each Hacksaw (BCT 127)
- 1 each Nailset, 1/32” and 1/16” (BCT 257)
- 1 each General pencil scriber (BCT 127, BCT 257)
- 1 each Crosscut handsaw, 8 pt. (BCT 127, BCT 103)
- 1 each Crosscut handsaw, 10 pt. or 12 pt. (BCT 103, BCT 257)
- 1 each Utility knife – retractable blade w/extra blades (BCT 127, BCT 257)
- 1 each Chisel set (1/4”, 1/2 “, ¾”, 1”) (BCT 103, BCT 257)
- 1 each Framing square w/rafter table (BCT 109, BCT 127)
- 1 each Chalk line and chalk (BCT 109, BCT 127)
- 1 each 4 in 1 hand file (BCT 103, BCT 257)
- 1 each 50’ tape measure (BCT 110)
- 1 each Aviation snips (straight) (BCT 127)
- Set Square buttons (BCT 127, BCT 109)
- 1 each 24” level (BCT 109, BCT 127, BCT 257)
- 1 each Drywall knife – 5” or 6” and 10” or 12” (Goldblatt, Doyle) (BCT 257)
- 1 each Drywall inside corner trowel
- 1 each Drywall pan (BCT 257)
- 1 each Hand held drywall sander/pole sander
- 1 each Drywall keyhole saw (BCT 257)
- 1 each Coping saw with various tooth blades (BCT 103, BCT 257)
- 1 each 7-1/4” circular saw (**)
- 1 each 25’ or 50’ extension cord, 16 gauge min. (**)
- 1 each ¼” or 3/8” electric/cordless drill and with steel twist high speed drill bit set 1/16” – ¼”, and speed bore (paddle) bit set 3/8”-1”, and Philips and square drive bits (BCT 103, BCT 257)
- 1 each Nail puller (Cat’s paw)
- 1 each Wonder bar & 18” pry bar
- 1 each Plumb bob (BCT 110)
Masonry Tools (BCT 234) (Goldblatt or Equal)
- 1 each 11” brick trowel
- 1 each 48” brass bound mason’s level
- 1 each Brick hammer - 24 oz.
- 1 each Jointer - 1/2 x 5/8 convex
- 1 each Standard brick spacing rule, folding
- 1 each Masons line - 24 thread - nylon
- 1 set Line blocks
** Required for all courses.
Estimated price for tools is $1,241.